SN Pixel V4 Lightsaber Operation Manual V1.1

Before reading this guide, make sure your lightsaber is a single-button or dual-button version. Note that lightsabers generally have three states, off, standby, and active.

Standby mode is while your saber is on (accepting inputs) but the blade is not active.
Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).

Table of Contents

More: SN Pixel V4 Lightsaber Bluetooth Connection Tutorial

1. One button operation

1.1 While blade is in standby mode

1.1.1 Enter standby mode

Press and hold until the button light illuminates.

1.1.2 Adjust volume

Press and hold until the breath light flashes once, then release.

1.1.3 Toggle boot effect

Press and hold the button until the ventilation light blinks twice, then release.

1.1.4 Change blade effect

Press and hold until the breath light blinks three times, then release.

1.1.5 Change sound fonts

Press and hold until the inflation light blinks four times, then release.

1.1.6 Power save mode

Automatically enters power save mode if no operation is performed within 10 minutes.

1.1.7 Enter boot status

Click the button after entering standby mode.

1.2 While blade is active

1.2.1 Blaster

Quick click on the button.

1.2.2 Lock

Press and hold until the breath light flashes once, then release.

1.2.3 Change Blade Color

Press and hold until the breath light blinks twice, then release.

1.2.4 FOC on/off

Press and hold until the inflation light blinks three times, then release.

1.2.5 Off

Press and hold until the inflation light blinks four times, then release.

1.3 Gesture operation in standby mode

1.3.1 Change tone fonts

Point the blade up, hold the button, and rotate the hilt.

1.3.2 Change BGM

Point the blade down, hold the button, and rotate the hilt.

1.3.3 Enter boot status

Twist on.

1.4 Gesture control in active mode

1.4.1 Twist off

Twist off.

1.4.2 Change blade color

Point down, press and hold, and twist the hilt.

1.4.3 Force

Point the blade up, hold the button, and rotate the hilt.

1.4.4 FOC

Tilt the blade.

1.4.5 Drag

Hold the button and tilt the blade.

1.4.6 Melt

Hold the button and push the blade horizontally forward.

2. Two-button operation

PWR Button: Main Button, Power Button.
AUX Button: Auxiliary Button, Function Button.

(When the buttons are distributed up and down: Upper button is the main button, lower button is the AUX button; When the buttons are distributed left and right: Left button is the main button, right button is the AUX button)

2.1 While blade is in standby mode

2.1.1 Switch sound fonts

Click the AUX button.

2.1.2 Adjust the volume

Press and hold the Main/AUX buttons simultaneously, then release the buttons after hearing the beep to enter the volume adjustment mode. Click the Main button to increase the volume and the Sub button to decrease the volume. To exit this mode, press and hold the Main/AUX buttons and release after you hear the beep.

2.1.3 Change the boot effect

Press and hold the Main button for 1 second until you hear the beep, then release.

2.1.4 To change the blade effect

Press and hold the sub button for 1 second and hear the beep, then release.

2.1.5 Power Save Mode

Automatically enters low-power mode if no operation is performed for 10 minutes.

2.1.6 Enter Boot Status

Click the button after entering standby mode.

2.1.7 Power off

Click the AUX button three times.

2.2 While blade is active

2.2.1 Power off

Click the Main button.

2.2.2 Blaster

Click the AUX button.

2.2.3 Lock

Press and hold the main button for 1 second until you hear the beep, then release.

2.2.4 FOC Off/On

FOC can be turned on or off by pressing and holding the main and AUX buttons simultaneously.

2.3 Gesture operation in standby mode

2.3.1 Change the sound fonts

Point the blade up, hold the AUX button, and rotate the hilt.

2.3.2 Change BGM

Point the blade down, hold the AUX button, and rotate the hilt.

2.3.3 Enter boot status

Twist on.

2.4 Gesture operation in active mode

2.4.1 Twist off

Twist off.

2.4.2 Change Blade Color

Point the blade down, hold the AUX button, and twist the hilt.

2.4.3 Force

Point the blade up, hold the AUX button, and rotate the hilt.

2.4.4 FOC

Tilt the blade.

2.4.5 Drag

Hold the main button and tilt the blade.

2.4.6 Melt

Hold the AUX button and push the blade horizontally forward.

Note: Please refer to the lightsaber's accompanying user manual for more detailed instructions and safety guidelines.